KA 1-8301 / KAX 1-8401
Economical point level control sensors for detection of dry bulk materials KA/KAX Installation Manual SafePoint 1-8511 Provides fail-safe performance wherever critical continuous operation must be ensured. Detection of both material presence/absence & its own operational status is performed on a continuous basis SafePoint Installation Manual Vertical Divider
|
|
Cable Based Smart Sensor
SiloPatrol® SMU 6-8511 Inventory Monitoring System is the first truly robust cable-based smart sensor system. It is a field-proven approach to reliably monitoring the level of materials in bins, silos & tanks up to 150 feet (45.7 m) in height SiloPatrol SMU Feature Sheet SiloPatrol Technical Specs Vertical Divider
|
RadarRight Non-Contact Level Sensor
Continuous level measurement system is a smart guided wave radar device used for monitoring the level of powders, granules and other bulk solids. It is also suitable for use with many liquids. It can be used in a wide assortment of vessels and industries for measuring levels at up to 200ft (60m) in height RadarRight S400 15-8414 Technical Specs - Bulk RadarRight S200 15-8213 Technical Specs - Liquids |
MONITOR - Solids Flow Sensor
Microwave Solids Flow Monitors Models SFD-2 & SFMonitor's line of microwave solids flow monitors are high quality, industrial grade instruments capable of providing a signal indicating the flow/no-flow condition of solids and powders in gravity chutes, feeders and pneumatic pipelines. The Model SFD-2 Solids Flow Detector provides relay outputs that can be setup to indicate changes in the target flow stream (on/off). The Model SFI Solids Flow Indicator provides an analog output which varies with changing conditions of the material flow stream. These non-contact monitors contain no moving parts or probes that can wear out or break off in the material flow, thus ensuring process integrity. The SFD-2 and SFI use low power microwaves to sense motion within the chute or pipeline being monitored. Microwaves are virtually unaffected by ambient noise and light, heat, humidity, pressure, vacuum, high or low temperatures or dust. This provides maximum effectiveness in typical industrial application environments. These advantages over sonic or mechanical flow monitors make microwave technology the best choice for solids flow monitoring. |
Features:
|
Capacitance Sensor
DOL Sensor are designed for general detection of feed, grain, wood, plastic & granulates
DOL 40R series:
|
Features:
40R Technical Specs 40R ATEX Technical Specs |
|
WAM SILOTOP® Zero
Vertical Divider
|
Model FV-16240
|
|
Model FV-8120
Vertical Divider
|
Model FV-9140
|
MONITOR - Broken Bag Detector
DustAlarm® Broken Bag Detector 18-8411 (Particle Emission Detector) provides a reliable and economical detection of leaks & filter failures in many powder / bulk solids industries The DustAlarm® is successfully utilized in a wide variety of applications where detection of dust levels is critical either to safety, maintenance, equipment operation, plant efficiency and /or the environment. The DustAlarm® measures the triboelectric effect to determine when particle emissions exceed acceptable levels. The DustAlarm® Broken Bag Detector incorporates visual indications and a relay output to maximize its user-friendliness and automation capabilities. A reference point is set by the sensitivity control adjustment, aided by the tri-colour LED. The alarm point is set by an alarm level control adjustment. The relay output can be used to activate an alarm device or can be integrated into a control system to enhance the overall operation of the dust collector. |
Features:
|
MONITOR - Air Pad
Vertical Divider
|
MONITOR - Evasser
Vertical Divider
|
Aeration Diffuser
|
SiloGuard System
CMC Silo Guard system protects & prevents:
How it works:
|
Important Components:
|
Pressure Relief Valve
A pressure relief valve should be mounted on top of any pneumatically filled silo or bin to provide emergency relief in the event that your bin is over filled or your filter vent becomes plugged. Mounting a pressure relief valve on top of your silo will provide protection against equipment damage when an over fill or filter vent plugging occurs. Our pressure relief valve provides pressure relief when the internal pressure of the silo exceeds 1 psi, or a vacuum condition of more than negative .25 psi exists. |
Dangers of Overfilling Silo:
|
Water Meters
Badger has been a trusted leader in flow measurement for over a hundred years & is ideally suited to the concrete industry.
Vertical Divider
|
Electromagnetic Flow Meters
Decrease system maintenance & deliver critical flow measurement
|